40 Series

Specification

Size (Screwed End): 1/2” – 2” (DN15 – DN50)
Size (Flanged End): 1/2” – 3” (DN15 – DN80)

Connection End

NPT and BSPT Screwed End
PN/ JIS/ ANSI Flanged End

Maximum Operating Pressure: 17 KGS
Working Temperature: 230°C

General Material

Dimensions: No.40 Series Unit: mm No. SIZE A B WT (KG) 41 15 108 62 2.8 42 20 133 203 5.5 43 25 162 273 9.5 44 32 184 314 16 45 40 216 380 22 46 50 260 432 35

Condensate Discharge Capacity In Kg/hr (circle Means Orifice Diameter)

Flow Capacity Selection

Integral Parts

CHECK VALVE – CV DSC Cast Iron Inverted Bucket Steam Traps furnished with Check Valves as standard The Check Valve (CV) &Scrubbing Wire (SW) cannot installed in one body.

Bucket Stainless Steel 304 Material for Resistance of Corrosion

Optional Parts

SCRUBBING WIRE – SW
A stainless steel wire put on capto prevent clogging vent hole of bucket dunning operation.

THERMO CONNECTOR – TC
DSC Steam Trap Test Kit could be connected by sensing temperature change inside of steam trap body
to inspect steam trap is ok or not.

BLOWDOWN VALVE – BV
Manual blow-down condensate and dirt form strainer.

BLOWDOWN BALL VALVE – BV

No. 980 – 992 - install 3/8” Stainless Steel Ball Valve
No. 983 – 995 - install 3/4” Stainless Steel Ball Valve

HOW TO ORDER Bucket TRAP No. SIZE AND SCREWED STANDARDMOP. 981 X 3/4”NPT X 9K + ACCESSORIES

Transaction Process

<

Certificate & Patent

ISO 9001:2008
Manufacture License of Special Equipment PN4.0 Mpa
Patent No: ZL 2009 2 0003337.2
SGS