All Prosperity Safety Valves Manufacturers
Search
Menu
  • Home
  • Products
  • News
  • About Us
  • Certificate
  • Contact Us
  • Download
  • Facebook Instagram
Home > Products > Cryogenic Valve > CPR-K
Products
  • Safety Relief Valve
  • Steam Trap
  • Air Trap
  • Cryogenic Valve
  • Valve Products
  • Control Valves
  • Rotary Joints
  • Solenoid Valve / Actuator
  • Sanitary Products
  • Fittings & Flanges
  • Expansion Joint

CPR-K

Cryogenic Back Pressure Regulators
Inquiry PREV NEXT Favorite
無現貨,到貨通知
Product Description

Bowling Brand CPR-K Series Cryogenic Back Pressure Regulators provide high flow above the desired set pressure with phosphor bronze diaphragm and adjustable spring design for use as economizers or diaphragm type pressure limiting device on cryogenic systems and cryogenic liquid cylinders or vessels. Bowling Brand CPR-K Series Cryogenic Back Pressure Regulators remain close position until the inlet pressure is higher than the desired set pressure point to open and allow fluid passing through back pressure regulators. The Cryogenic Back Pressure Regulators can stabilize the pressure while the pressure in pipeline is unstable.

Product Specification

Size: 1/2”
Maximum Inlet Pressure: 600 psi
Temperature Range: -196 °C ~ 65 °C
Fluid: LNG, LO2, LN2, LAR, Non-corrosive gas

Application:
Cryogenic pipeline/ Cryogenic pressure vessel

Feature:

  • 100% Pressure Test based on factory standard.
  • Valves are cleaned by CGA-G-4.1 standard for the oxygen application.
  • Back pressure valve remain closed when the pressure in the line is lower than the set pressure. When the pressure is higher than the setting, it open and allow the fluid pass. Furthermore, the valve can stabilize the pressure while the pipe pressure is unstable.

ComponentMaterial
Body Brass
Spring Chamber Bronze
Spring
Screw
Nut Poppet
SUS304
Seal PTFE FRP
Diaphragms Phosphor Bronze
Nameplate Aluminum
Other parts Brass

 

Dimensions (Unit:mm):

P1H1
Inch (mm)
P2H2
Inch (mm)
L
Inch (mm)
1/2” NPT 6” (152.6) 1/2” NPT 1.12” (28.6) 2.95” (74.9)
 
TypeMaximum Inlet pressure
(Psi)
Inlet/ outlet ConnectionPressure Range Mpa (Psi)
CPR-K-15 600 1/2”NPT 0~0.21 (0~30)
CPR-K-15 600 1/2”NPT 0.14~0.34 (20~50)
CPR-K-15 600 1/2”NPT 0.28~0.55 (40~80)
CPR-K-15 600 1/2”NPT 0.52~1.03 (75~150)
CPR-K-15 600 1/2”NPT 0.69~1.90 (100~275)
CPR-K-15 600 1/2”NPT 1.38~2.76 (200~400)
CPR-K-15 600 1/2”NPT 2.07~4.14 (300~600)

 

Products| News| About Us| Contact Us| Sitemap

Long Tsuen Industrial / All Prosperity Enterprise Co.,Ltd. : ROOM 604 6FL No.52 Chang An E.Rd. Sec. 2 Taipei,Taiwan R.O.C.

Tel:886-2-25217794 Fax:886-2-25429613 Email:[email protected]

Copyright © 2019 ALL PROSPERITY ENTERPRISE CO., LTD. All Rights Reserved.